Cat Wheel Videos

There are 15 cat videos tagged with cat-wheel.

I made a catwheel in a inner wall in my appartment and made it also a design light object..
Later on in the video you can see my sweet little Cleo (Egyptian Mau) fetching her all time favorite toy! 8)

To give answer to all the questions of how to make it:

- most important to know is that you need to work with a router (with a circle jig). Here is a video of how that works: https://youtu.be/29l1Bg4fcn8?t=2m26s .
- best is to make the catwheel bigger then mine, I would suggest at least 115-120 cm diameter.
- Lets say you are going to make a catwheel of 120cm o.d., then you`ll need 2 pieces of at least 120x120cm of 15mm mdf.
- screw both pieces on top of eachother, SCREWS OUTSIDE THE 120cm CIRCLE (on the 4 corners)
- draw crosslines from the corners of these pieces to find the midle.
- drill a hole in the middle for the circle jig of the router.
- the front circle has an inner diameter of 110cm and an outer diameter of 120cm (so, it is 5cm wide).
- both pieces are cut from the backside, because it has a groove of approx 6 mm wide and 10mm deep, where the material for the runningsurface is glued in. This groove has an diameter of 115cm.
- Adjust your circle jig to 57,5cm (115/2) and cut a circle of 10mm deep.
- Flip the 2 attached pieces of mdf and do the same on the other side.
- Lets say that this side is going to be the front circle.
- drill a few more screws within the 110cm inner diameter to secure this part to the backpiece. THE SCREWS MAY NOT GO THROUGH BOTH PIECES, just long enough to attatch them together.
- set your circle jig to 120cm and cut the outer diameter of the front piece.
- flip the pieces over and cut the o.d. of the back piece.
- Now you have 2 circular pieces of mdf with an o.d. of 120cm and a groove with a diameter of 115cm.
- Flip again to the side from where you screwd both pieces together. This is going to be the frontpiece.
- Adjust the circle jig to 11cm and cut the inner diameter of the piece. It doesn`t matter if you cut a little bit to deep, cause you will cut in the backside of the backpiece (and that is out of sight)
- take the screws out, the router work is done!
- Lay the backpiece on the ground or your working table with the groove facing upward.

RUNNING SURFACE:
- for the running surface, I recommend using bendable wood.
- If you like the running surface to be 20cm deep, let it cut to piece of 22cm wide (since both ends will be glued in a 10mm deep groove).
- the total length of the running surface you can calculate with the formula: length = diameter x pi. (pi = 3,1415). So, for a total length running surface of the 115cm diameter groove, you will need 115 x 3,1415 = 361, 27 cm of running surface.
- I`m affraid you are not going to find it in one piece.
- Best is to make it out of 2 pieces, with on both end one piece overlapping the other piece.
- This means you`ll need the router again to take away half of the thicknes of the material on both ends of both parts of the running surface.
- with an overlap of 5cm the total length needs to be 10cm longer.
- Because of the overlap, we can round of the total length downwards to 360cm + 10cm = 370cm.
- Meaning you`ll need 2 pieces of 185 x 22 cm of running material (= boundable wood/ multiplex).
- take away half of the thincknes on all 4 ends of these pieces.
- Now it`s time to glue the wheel together.

- Put some wood glue in the groove of the circular backpiece.
- put 1 piece of the running surface in the groove.
- put some glue on both ends (overlap) of the other piece of the running surface and put it in the groove to round the circle.
- now put some glue in the groove of the frontpiece and place it on top of the side of the the running surface.
-clamp it together and let it dry.

When its dry you can attach a ballbearing to the back of the wheel.
You can find suitable ballbearings on ebay, look for "FLANGE MOUNT BALL BEARING", these come together with a backplate, mountingplate.
- Be very secure with mounting it exactly in the middle of the wheel, you can use the hole from the circle jig from the router to center it.
- I used a shaft of 25mm thick, I don`t know about the options for shafts, I welded it myself.

- For the people who want to make the wheel in a wall, also a hole in the wall needs to be cut.
- Make the diameter of this hole approx 2cm wider then the running diameter (not bigger then the outer diameter of the frontpiece).

You can attatch the leds if you like.
Make a very sterdy construction to mount the shaft on.

I hope to have explained the biggest part of "how to build"....

Random Cat Wheel Videos

Thumbnail for Cat Video Cat Wheel - Outdoor

Cat Wheel - Outdoor

Lily & Suki Maclaw taking their daily exercise in the new Outdoor version of the Maclaw Wheel, only 17 weeks ago they had both had litters of 6 kittens, the Maclaw wheel has helped them get back in shape and they both look fantastic. Bengals are extremely energetic cats and nee...
Lily & Suki Maclaw taking their daily exercise in the new Outdoor version of the Maclaw Wheel, only 17 weeks ago they had both had litters of 6 kittens, the Maclaw wheel has helped them get back in shape and they both look fantastic. Bengals are extremely energetic cats and need to be moving all the time, so we now have a Maclaw wheel in all our outdoor enclosures so they can burn off all their energy. If you live in the UK Mainland and would like one, please visit our website http://www.mac...
Thumbnail for Cat Video Making our cat wheel

Making our cat wheel

Making our cat wheel
Making our cat wheel
Thumbnail for Cat Video homemade DIY cat wheel (and also designlight)

homemade DIY cat wheel (and also designlight)

I made a catwheel in a inner wall in my appartment and made it also a design light object.. Later on in the video you can see my sweet little Cleo (Egyptian Mau) fetching her all time favorite toy! 8) To give answer to all the questions of how to make it: - most important to kno...
I made a catwheel in a inner wall in my appartment and made it also a design light object.. Later on in the video you can see my sweet little Cleo (Egyptian Mau) fetching her all time favorite toy! 8) To give answer to all the questions of how to make it: - most important to know is that you need to work with a router (with a circle jig). Here is a video of how that works: https://youtu.be/29l1Bg4fcn8?t=2m26s . - best is to make the catwheel bigger then mine, I would suggest at least 115-120 cm di...
Thumbnail for Cat Video Kittens on  the Cat Wheel

Kittens on the Cat Wheel

Maclaw Bengals kittens at 13 weeks old on our wheel
Maclaw Bengals kittens at 13 weeks old on our wheel